Accelera 245/35 R19 93Y PHI 2024

Very Low Profile

The Accelera PHI 245/35 R19 is a wide, very low-profile tyre intended for passenger cars designed around 19-inch performance-style wheels. Its short sidewall responds quickly when the steering direction changes and limits tyre movement through bends. The trade-off is reduced ride cushioning and less protection for the wheel when crossing potholes, raised joints or damaged road edges.

Product Information

The sidewall height is only 35% of the tyre’s 245 mm width. This explains its direct road feel and limited ability to isolate the cabin from sharp impacts. The 93 load index supports up to 650 kg per tyre under specified conditions. Its Y rating describes tested speed capability, but it does not guarantee track-level grip or make high-speed public-road driving appropriate.

Vehicle Fitment

This size may suit selected performance hatchbacks, executive saloons, sports-oriented coupes and vehicles fitted with staggered wheel packages. On some cars, 245/35 R19 is used only on the front axle, with a wider tyre fitted at the rear. The specification at every wheel position should therefore be checked before ordering.

Confirm these points:

• The complete 245/35 R19 size
• A minimum load index of 93
• The required speed rating
• Whether the vehicle has staggered tyres

Real-World Behaviour

On a suitable car and smooth road, the PHI feels precise during normal cornering and controlled during motorway lane changes. Its broad tread gives the vehicle a stable footprint, while the short sidewall reduces the delay between steering input and tyre response.

On rough urban roads, the tyre feels noticeably firm. Deep potholes should be approached carefully because the small amount of sidewall provides limited impact absorption. This size is unlikely to suit a driver who places ride comfort, wheel protection or low replacement cost above steering response.

Wet-road behaviour depends on tread depth, inflation pressure, road contamination and speed. Wide, low-profile tyres can also follow grooves in the road more noticeably than narrower tyres. Incorrect alignment may cause rapid inner-edge wear, which is easy to miss unless the full tread width is inspected.

Ordering and Installation

Customers purchasing through dwbtyres.ae should confirm the production-date code on the physical tyre, available quantity and whether fitting includes balancing and valve replacement. Wheel condition should be checked carefully, as even minor rim damage can contribute to air loss or vibration.

Buying the Correct Fitment

Drivers looking to buy tyres in UAE should select this PHI only when 245/35 R19 93Y is approved for their vehicle. Anyone preparing to buy car tyres in UAE should confirm both axle sizes and the approved wheel width, particularly when the vehicle uses a staggered setup.