- Pattern PHI
- Size 245/40 R19
- Load Index 98Y
- Origin Indonesia
- Year 2024
-
Free Delivery without
Installation Available on selecting 4 or more quantities -
Free Alignment
Check Free alignment check on the car -
Always
Authentic we only sell 100% authentic products backed by manufacturers warranty
Accelera 245/40 R19 98Y PHI 2024
The Accelera 245/40 R19 98Y PHI 2024 is a low-profile road tyre for compatible executive saloons, sporty coupés, performance hatchbacks and selected estate cars. Its 245 mm section gives the vehicle a broad footprint without reaching the extra width of a 255 or 265 fitment. The 40-profile sidewall favours direct steering, but it also reduces cushioning over damaged roads.
Size and Ratings
| Specification | Details |
|---|---|
| Brand | Accelera |
| Pattern | PHI |
| Tyre size | 245/40 R19 |
| Load index | 98 |
| Speed rating | Y |
| Production year | 2024 |
| Intended use | Performance-oriented road driving |
A load index of 98 means each tyre has a maximum rated capacity of 750 kg when correctly installed and inflated. The Y speed rating corresponds to a maximum rated speed of 300 km/h under specified conditions. These ratings are technical limits, and the vehicle manufacturer’s specifications and legal speed restrictions must always be followed.
On-Road Character
On a suitable car, the 245 mm tread width provides a settled feel through long motorway bends and progressive lane changes. The 40-profile sidewall moves less under steering input than a taller touring tyre, helping a compatible vehicle respond more promptly. It suits drivers who value controlled road behaviour over a particularly soft ride.
The compromise is noticeable on rough asphalt. Expansion joints, pothole edges and uneven repairs are transmitted more clearly into the cabin. There is also less rubber between the road and the 19-inch wheel, increasing the risk of impact damage. The wide tread may follow grooves in worn surfaces, particularly when tyre pressure or wheel alignment is incorrect.
Product Information
• Wide 245 mm section for approved passenger vehicles
• Low 40-profile sidewall with responsive steering behaviour
• Maximum rated capacity of 750 kg per tyre
• Y speed rating for vehicles requiring this specification
• Intended for paved urban roads and motorway driving
• Manufactured to the stated 2024 specification
Checking Vehicle Suitability
The complete 245/40 R19 size must be approved for the vehicle’s exact model, engine, trim and wheel package. A car using 19-inch wheels may require a different width or profile. Wheel width, suspension clearance and the required load rating must therefore be checked before ordering.
Some vehicles use staggered wheels, with different tyre sizes on the front and rear axles. Confirm whether 245/40 R19 belongs on one axle or all four wheels. Replacing it with 245/35 R19, 255/40 R19 or another similar-looking size without approval can alter overall diameter, speedometer accuracy and electronic stability-system behaviour.
The Y rating does not make the PHI a dedicated competition tyre. Its intended role remains normal paved-road use within the limits of the vehicle.
Shop Information
The Accelera PHI in this exact specification can be ordered through dwbtyres.ae after confirming the approved fitment, axle position and required quantity.
UAE Purchase Advice
Drivers intending to buy tyres in UAE should inspect low-profile sidewalls after hitting potholes or kerbs, even when no immediate pressure loss is visible.
Before you buy car tyres in UAE, examine the old tyres for inner-edge and shoulder wear. Any alignment or suspension problem should be corrected before the replacement set is fitted.
| Display Name | PHI |
|---|---|
| Parts Category | Tyres |
| Brand | Accelera |
| Pattern | PHI |
| Tyre Size | 245/40 R19 |
| Load Index | 98Y |
| Tyre Type | All Season |
| Origin | Indonesia |
| Run Flat | No |
| Warranty Period | 1 Year Warranty |