Accelera 225/35 R18 87Y PHI R 2024

Accelera PHI R 225/35 ZR18 87Y XL is a performance-oriented tyre designed for drivers looking for responsive steering, high-speed stability and controlled cornering on paved roads. This configuration features a 225 mm section width, 35-series profile and 18-inch rim size, combined with an 87Y service description. The 87 load index supports a maximum load of 545 kg per tyre, while the Y speed rating is designed for speeds up to 300 km/h under specified operating conditions. The PHI R uses an updated tread design with triple ribs, additional sipes and reinforced shoulder blocks to support steering response, cornering stability and reduced pattern noise.

About Accelera PHI R 225/35 R18 87Y

The Accelera PHI R is an updated version of the PHI performance tyre. The manufacturer describes it as an all-season performance tyre with a tread design focused on handling, stability and everyday usability. For the 225/35 ZR18 87Y XL specification, Accelera lists a maximum load of 545 kg per tyre, maximum inflation pressure of 44 PSI, an approximately 615 mm overall diameter and 230 mm section width.

Triple-rib tread design

The PHI R's triple-rib layout is designed to improve high-speed stability and steering response. The continuous tread structure helps maintain consistent contact with the road and provides predictable directional behaviour during acceleration, cruising and lane changes.

Cornering stability

Reinforced shoulder blocks provide additional support during cornering and manoeuvring. Combined with the low 35-series profile, the shoulder construction is intended to provide a more direct steering response and improved stability when changing direction.

Additional sipes and noise control

The PHI R incorporates additional sipes designed to reduce tread-pattern noise. This helps balance the tyre's performance-oriented construction with everyday road use and contributes to a more controlled acoustic experience inside the vehicle.

Dry and wet-road performance

The performance-oriented tread is designed to maintain road contact and handling consistency across normal paved-road conditions. European tyre-label information for the 225/35 ZR18 87Y XL configuration lists D for fuel efficiency, C for wet grip and B for external rolling noise at 70 dB. Actual braking, traction and aquaplaning performance will vary according to tyre condition, inflation pressure, vehicle setup and road conditions.

High-speed capability

The 87Y service description corresponds to a maximum load rating of 545 kg per tyre and a Y speed category of up to 300 km/h. These figures represent the tyre's rated capability under specified conditions and should not be interpreted as a recommendation to operate a vehicle at the maximum rated speed.

Who should consider this Accelera?

Accelera PHI R 225/35 R18 87Y XL is intended for compatible passenger vehicles using this exact tyre specification. Its low-profile construction and performance-oriented tread make it particularly relevant for drivers prioritizing steering response, cornering stability and high-speed road capability. For customers using Dwbtyres to buy car tyres in UAE, always confirm the vehicle manufacturer's approved tyre size, load index and speed rating before ordering. Buyers comparing Accelera Tyres should match the complete 225/35 R18 87Y XL specification.