Bridgestone 205 R16C 110S Dueler H/T D840 2024

The Bridgestone Dueler H/T D840 205R16C 110/108S is a highway-terrain tyre designed for SUVs, 4x4s and light commercial applications that require a balance of durability, stability, wet and dry road performance, and comfortable highway driving. This commercial-size radial tyre uses a 205 mm nominal section width with a 16-inch rim diameter and carries a 110/108 load and S speed rating. The higher 110 load index corresponds to up to 1,060 kg per tyre in single-wheel service, while the 108 index corresponds to up to 1,000 kg in dual-wheel service. The tyre has an overall diameter of approximately 738 mm and is designed around a 6.0-inch standard rim, with 5.5–6.5-inch permitted rim widths.

About Bridgestone  205 R16C Dueler H/T D840

The Dueler H/T D840 is a highway-oriented tyre developed for SUVs and 4x4 vehicles where ride comfort, road holding and durability are important. Bridgestone describes the D840 as a premium highway tyre with strong wet and dry road performance, low road noise and increased vehicle stability. Its construction combines a non-directional tread pattern, jointless cap ply and reinforced polyester body plies to support comfortable highway driving, stability and steering response.

205R16C Size and Commercial Construction

The 205R16C specification has a nominal section width of 205 mm and is designed for a 16-inch wheel. Unlike passenger-car sizes that normally include an aspect-ratio number, the 205R16C format belongs to the commercial-vehicle sizing system. The exact Bridgestone specification has an overall diameter of approximately 738 mm and a standard rim width of 6.0 inches, with 5.5–6.5-inch permitted rim widths.

110/108S Load and Speed Rating

The exact specification is identified by Bridgestone as 110/108S. The 110 single-wheel load index corresponds to a maximum rated load of 1,060 kg per tyre, while the 108 dual-wheel load index corresponds to 1,000 kg per tyre. The S speed rating corresponds to speeds up to 180 km/h. Because this is a commercial C-rated size with dual load indexing, the 110/108 specification should be considered according to the vehicle's axle and wheel configuration rather than treating 110 as the only applicable load figure.

Highway Tread Design

The Dueler H/T D840 uses a non-directional tread pattern designed to support stable highway driving and reduced road noise. Bridgestone states that its durable tread is intended to provide long wear life and traction on unsealed surfaces, while the tread design contributes to a quieter and more comfortable driving experience.

Stability and Steering Response

The reinforced polyester body plies are designed to increase vehicle stability and steering response. This construction works with the tyre's highway-oriented tread to provide controlled road behaviour for SUVs, 4x4s and applicable light commercial vehicles. The rounded casing profile is also associated with a smooth ride in Bridgestone's D840 specifications.

Wet and Dry Road Performance

Bridgestone positions the Dueler H/T D840 for both wet and dry road use, with the manufacturer specifically highlighting strong grip in wet and dry conditions. The tread layout is designed for highway use while retaining traction when road surfaces become wet or less consistent.

Ride Comfort and Road Noise

Comfort is one of the main characteristics of the Dueler H/T D840. The non-directional tread pattern is designed to reduce road noise, while the jointless cap ply contributes to a smooth ride and lower noise levels. These features make the D840 suitable for drivers who spend significant time on paved roads and highways.

All-Season Highway Use

Retailer information for the exact 205R16C 110S D840 identifies it as an all-season highway tyre. Bridgestone's regional product information describes the D840 as a highway tyre for SUVs and 4x4s, with wet and dry road capability. It is not presented as a severe-winter tyre, so dedicated winter requirements should be checked separately against the tyre's sidewall markings and the vehicle manufacturer's recommendations.

UTQG and EU Label Information

A reliable exact-variant source does not confirm a UTQG treadwear, traction and temperature rating for the 205R16C 110/108S D840. Likewise, a complete EU tyre-label classification for this exact specification could not be reliably confirmed. These fields are therefore not stated rather than being inferred from other Dueler H/T 840 sizes.

2024 Production Year

This listing specifies the production year as 2024, with the product identified as a 2024-manufactured Bridgestone Dueler H/T D840 and Japanese origin by the retailer. The exact manufacturing week should be checked from the DOT/date code on the tyre sidewall, because the production year alone does not identify the precise production week.

Who Should Consider This Tyre?

The Bridgestone Dueler H/T D840 205R16C 110/108S is suited to drivers and fleet operators looking for a highway-oriented tyre in a commercial 205R16C fitment. It is particularly appropriate where durability, ride comfort, wet and dry road traction, stability and low road noise are priorities. Before fitting, the vehicle manufacturer's recommended tyre size, load requirement, speed rating and single- or dual-wheel configuration should always be confirmed.