Pirelli 285/40 R22 110Y P Zero PZ4 NC0 2024

The Pirelli P Zero PZ4 285/40 R22 110Y NC0 is a Porsche-specific ultra-high-performance summer tyre developed for the Porsche Cayenne. Its 285/40ZR22 XL construction combines a high 110 load index with a Y speed rating, making it suited to high-performance SUV applications where steering response, dry-road control and high-speed stability are important.

This NC0-marked version is a Porsche-approved fitment, meaning the specification is designed around the requirements of the Cayenne rather than being treated as a generic 285/40 R22 tyre. Pirelli positions the P Zero PZ4 as a high-performance summer tyre for cars and SUVs, with the exact NC0 configuration using an XL construction and 110Y load and speed designation.

Tread Design and Road Behaviour

The P Zero PZ4 uses an asymmetric performance-oriented tread layout with longitudinal drainage channels, shaped central tread areas and substantial shoulder sections. Pirelli describes dedicated inner-shoulder pattern features for wet-road performance and an optimised outer-shoulder design intended to support handling, noise control and rolling resistance. On dry roads, the wide 285 mm footprint and performance-focused construction are suited to precise steering inputs and stable cornering. The low 40-series sidewall also helps limit excessive sidewall movement during directional changes.

Wet Grip, Braking and High-Speed Control

The PZ4 compound and tread design are intended to maintain grip when the road surface is wet while providing predictable braking and handling. The NC0 Porsche version carries a Y speed symbol, corresponding to a maximum speed rating of 300 km/h under standard tyre-rating conditions. The 110 load index represents a maximum rated load of 1,060 kg per tyre. These figures should always be considered alongside the vehicle manufacturer's recommended tyre pressures and axle loads.

Comfort and Everyday Driving

A 22-inch wheel and 40-series profile naturally provide less sidewall cushioning than a smaller-wheel touring configuration, so road impacts can be felt more clearly on rough surfaces. The PZ4 nevertheless uses an optimised tread pitch sequence and compound intended to balance handling with everyday road refinement. For a large performance SUV, this configuration is aimed more toward responsive road behaviour than maximum ride softness.

Who Should Consider This Configuration?

This exact Pirelli configuration is most relevant to Porsche Cayenne owners whose vehicle requires the NC0-approved specification. It suits drivers who value responsive steering, high-speed stability and performance-oriented summer-road behaviour. Drivers prioritising winter capability, deep snow performance or a softer touring feel should consider a tyre designed specifically around those requirements instead. Dwbtyres can help buyers check the required OE marking and size before ordering, particularly when they want to buy car tyres in UAE.

Size-Specific Buying Considerations

The 285/40 R22 dimension uses a 22-inch rim, a 285 mm nominal section width and a relatively low sidewall. The XL construction provides the required load capacity for this application, while the NC0 marking identifies the Porsche-specific version. Buyers should not substitute another 285/40 R22 P Zero PZ4 variant simply because the basic dimensions look identical, as Pirelli produces different OE-marked configurations. For other applications, see the wider range of Pirelli Tyres and confirm the vehicle-specific approval before purchase.