Sailun 195 R15 106/104R Extmile SL87N 2026

About Sailun 195 R15 106/104R Extmile SL87N 2026

The Extmile SL87N from Sailun Tyres is designed specifically for light commercial vehicles. Sailun describes the pattern as focusing on load-bearing capability, wear resistance and tyre life, with an optimised tread contour and internal structure intended to improve heat dissipation around the shoulder and bead. This matters on working vans because sustained loading can generate more heat and casing stress than normal passenger-car use. The 195 R15C version is an 8-ply-rated commercial fitment rather than a standard 195-width passenger tyre.

106/104 Load Capacity for Working Vans

The most important numbers in this configuration are arguably 106/104. Load index 106 corresponds to 950 kg per tyre in single-wheel use, while 104 corresponds to 900 kg per tyre in an applicable dual-wheel arrangement. The R speed rating permits a maximum rated speed of 170 km/h. These figures define tyre limits rather than the permitted payload or operating speed of the vehicle itself.

Drivers looking to buy car tyres in UAE for a commercial van should therefore confirm the complete 195 R15C 106/104R requirement against the vehicle placard or manufacturer documentation. Choosing a tyre solely because its width and rim diameter match is not sufficient for a load-carrying vehicle.

Deep Tread for Wear and Water Clearance

The SL87N uses a relatively deep commercial tread with continuous longitudinal drainage channels, solid centre tread sections, lateral grooves and substantial shoulder blocks. Sailun specifically identifies the wide tread and deep grooves as measures intended to improve wear resistance and service life. The channels also provide routes for water to leave the contact area during wet-road operation.

Independent European product data for this exact 195 R15C 106/104R specification lists wet grip at B and fuel efficiency at C. External rolling noise is rated at 70 dB, noise class B. These figures provide a more useful indication of its intended working character than trying to compare it directly with a comfort-oriented passenger tyre.

Heat Management Under Sustained Loads

Commercial tyres can spend long periods carrying substantial loads, making heat management especially important. Sailun states that the SL87N's tread contour and internal structure are optimised to dissipate heat around the shoulder and bead. The bead area also uses a wear- and heat-resistant rubber compound, while the reinforced side area contributes to load-bearing strength.

This does not remove the need for correct inflation. Running a loaded commercial tyre below its specified pressure can increase flex and heat generation significantly. Operators should set pressure according to vehicle and load requirements rather than relying on a generic passenger-car pressure.

Where the Extmile SL87N Makes Sense

Sailun 195 R15C 106/104R Extmile SL87N is most appropriate for commercial vans and light trucks requiring this exact C-rated specification. Its priorities are load support, wear resistance, drainage and durability, making it more relevant to delivery work, commercial transport and regular road mileage than drivers seeking sharp steering or unusually soft ride comfort.

The tyre is not a dedicated off-road pattern, and European data identifies it as a summer commercial tyre without 3PMSF certification. Buyers needing severe-winter capability, aggressive off-road traction or passenger-car refinement should choose according to those different requirements. The supplied 2026 production version is listed as Chinese-made, and its load-focused construction gives this Extmile SL87N a clearly defined role within the commercial range available through Dwbtyres.